Sticks & Triggers Calibration

Hold image.png simultaneously to enter calibration mode. The indicator will flash slowly in white during this process. At this point, push both sticks all the way to their limits and rotate them 2-3 times. Press both triggers fully down with appropriate pressure for 3 times. Finally, press image.png to exit. The indicator will return to its normal state.


Gyroscope Calibration

Place the controller on a stable, flat surface. Hold image.png simultaneously, and the gyroscope will automatically begin calibration. During calibration, the indicator will flash in red and blue alternately. When the indicator returns to its original light effect, the calibration is complete.