Activation Through GameSir Remapper

How to use A3 Remapper

Please enable below permissions before activation:

Step 1 Turn on [Display pop-up window] in GameSir World

[Additional Settings]>[App permission]>[GameSir World]>[Display pop-up window]

 

Step 2 Turn on [USB Debug mode]

 [Additional Settings]>[Developer options]>[USB debugging]

 

Step 4 Choose USB Mode

[System]>[Developer options]>[Default USB Transfer Mode]>[No data transfer].  

 

NOTE: If your mobile phone is Miui 8.0 or higher, you need to turn on [USB Security Setting]; if your mobile phone is Hauwei 7.0 or higher, turn on [Allow ADB debugging in charge only mode].

 

How To Do Activation

Step 1 Plug A3 into the port of the 5V charger, then A3 indicator will stay red.

Step 2 Connect A3 to the mobile phone via USB cable(as following picture shows).

 

Step 3 If the connection is completed, the on-screen will read “Allow USB debugging?”; click “OK”, and A3 will flash in green and be activated.

Step 4 When the activation is completed, A3 indicator will stay half-red and half-green, and GameSir World App will read “Mapping starts successfully”, then A3 can be removed.

Step 5 After Mapping activated, you can connect controllers to the mobile phone via GameSir World App.

NOTE: If your Android phone is powered off, and it need activating after powering on.

 

How to use A4  Remapper

Please enable below permissions before activation:

Step 1 Turn on [Display pop-up window] in GameSir World

[Additional Settings]>[App permission]>[GameSir World]>[Display pop-up window]

 

Step 2 Turn on [USB Debug mode]

 [Additional Settings]>[Developer options]>[USB debugging]

 

Step 3  Choose USB Mode

[System]>[Developer options]>[Default USB Transfer Mode]>[No data transfer]. 

 

NOTE: If your mobile phone is Miui 8.0 or higher, you need to turn on [USB Security Setting]; if your mobile phone is Hauwei 7.0 or higher, turn on [Allow ADB debugging in charge only mode].

 

How To Do Activation

Step 1 Connect A3 to the mobile phone via USB cable(as following picture shows).

 

Step 2 If the connection is completed, the on-screen will read “Allow USB debugging?”; click “OK”, and A4 will flash in green and be activated.

Step 3 When the activation is completed, A4 indicator will stay half-red and half-green, and GameSir World App will read “Mapping starts successfully”, then A3 can be removed.

Step 4 After Mapping activated, you can connect controllers to the mobile phone via GameSir World App.

NOTE: If your Android phone is powered off, and it need activating after powering on.